Tag: beats

New Sample Pack – Tr-808 into Mpc60 16 Levels Tuning!

Posted on by TimSlamming

 

Tr-808 into Mpc60 16 Levels Tuning

“Tr-808 into Mpc60 16 Levels tuning”

<<< Just dropped this new pack  >>>

It basically lets you turn your new skool midi controller into an Mpc60 with the 16 levels tuning feature turned on.

It consists of 15 x 808 drums that i sampled into my mpc, turned 16 levels tune on and then recorded each pad out into Protools.

 

If you’re not familiar with 16 levels it is just like keyboard mode in maschine. It just pitches one sound over 16 pads.

 

The Mpc60 adds some slight character especially in the lower pitches

and some 12 bit grit which it is renowned for.

 

All samples are in .wav format, mono at 16 bit 44.1Khz.

There are 240 samples totalling 27mb.

At only $2 you can’t go wrong!

 

Check out some demos here.

or below 😉

Cheers!

Any questions feel free to contact me at tim@slammingsamples.com

 

 

Sample SALE until the end of May!

Posted on by TimSlamming

Sample Sale!

I just picked up an MPC 3000 so I’m in a good mood and thought I would drop the price of all of my sample packs.

Get em while they’re cheap. All Original and Royalty free made by yours truly.

May Sale

Thanks for the checking this out, and keep making beats.

Tim,

SlammingSamples.com

Next up…ASR-10 Sample pack. ;-p

Posted on by TimSlamming

Next in the works is a sample pack made with the Ensoniq ASR-10. I’ll try and put a bit of everything in there, Kicks, snares, hats, percussion, some bass and also some synth sounds. Probably some guitar licks too.

For a while I had the idea to record into Protools first so I could then sample out of protools into a few different samplers, but this idea is boring and not as cool as going straight into the ASR!

It will definitely take longer this way so don’t expect this pack to come out tomorrow.

Some possible instruments / sounds to expect – (this might change a bit)

  • I’ll crack out my tabla for sure.
  • Bongos / congas / tambourines / shakers
  • Borrow a nice P-bass
  • My housemate’s old fender strat and Gibson Orville. 
  • Some maton acoustic
  • Nord Rack 1 synth
  • Moog Minitaur
  • tr 707
  • tr 808
  • Alexis hr 16
  • I’ll dust off the Juno 106
  • My Premier drum kit will be the bulk of acoustic drum sounds.

 Hopefully this should satisfy some musical pallets. Anyway I’ll see how I go.

Thanks for stopping by, and please check out my other packs, they are pretty cheap 😉

Tim

www.Slammingsamples.com

Roland JV-880 into Akai S-612 Sample Pack. Out Now!

Posted on by TimSlamming

Check out my new Sample pack “Roland JV-880 into Akai S-612” The early 90’s rack synth sampled into the 12 bit akai sampler. You don’t need to fake it with bit crushers or lo-fi plugins, these are already dirty enough 😉

It’s about 100mb of 16bit 44.1 wavs. Price is only $2

Thanks for checking it out.

Tim

www.Slammingsamples.com

808 into MPC60 mini Sample Pack FREE

Posted on by TimSlamming

808 into MPC60 mini Sample Pack FREE

 The famous TR-808 sampled directly into the MPC60 then recorded into Protools at 96Khz at 24bit. Normalised to zero then bounced to their respective formats. 17 FREE samples in two different formats (24bit 96Khz and 16bit 44.1Khz).

 

Hope you like it,

Tim.

SlammingSamples.com

Making New Mini 808 Sample pack “808 into MPC60”

Posted on by TimSlamming

808 into the  MPC60 Drum Kit


This will be an 808 mini Drum kit consisting of 16 Drum hits. All samples were from the TR-808 sampled into the MPC60. Its a bit Dirty. I made it all fit on to one old 720kb Floppy on the 60, so u get some of the machines truncation artefacts at the end of samples, its like a slight dull click.  Also on the longer samples like the cymbal, you can here some slight sounds of the sequencer ticking away in the background. I thought about removing it, but I thought what they hell, its got some character from the old unit. The bass drum doesn’t have the sequencer noise in case your wondering. Anyway this kit will be ready soon.